Rely on tested quality and order brake calipers and accessories directly online.

Safety-relevant component of the brake system

The brake calliper is the decisive component for the safety and deceleration of your truck or trailer. It converts the pneumatic or hydraulic pressure into mechanical clamping force by pressing the brake pads precisely against the brake disk. In heavy commercial vehicles, the brake calliper must not only dissipate enormous frictional heat, but also function absolutely reliably even under the most adverse weather conditions. At FZB Fahrzeugbedarf you will find a large selection of brake callipers in OEM quality, which impress with their robust design and precise fit. A high-quality brake calliper minimizes the risk of brake fading and ensures an even wear pattern for your brake pads.

Repair and spare parts for your brake caliper

In our store, you will find repair kits for brake callipers, matching brackets and supports as well as cover plates. These components enable professional repair in the event of wear or defects without having to replace the entire brake calliper.

Brake caliper

What should you look out for when buying:

SUITABLE REPAIR KIT

Choose a set that exactly matches your brake calliper type and design, including guide elements and seals.

HOLDER AND CARRIER COMPATIBILITY

Make sure that the bracket or carrier you choose exactly matches your vehicle model and axle configuration.

PROTECTIVE PLATES AND COVERS

These guarantee additional protection against dirt and splash water – check whether the cover is compatible with the saddle housing.

When should the brake calliper be checked or replaced?
A defective brake calliper is often indicated by an uneven braking effect on the axle, unusual heat development on the rim or one-sided wear of the brake pads. Seized sliding bolts or damaged dust protection sleeves are particularly common causes. If the brake calliper no longer opens fully, this leads to permanent grinding of the pads, which increases fuel consumption and can irreparably damage the brake disk. A regular visual inspection of the guide units and their tightness is therefore essential for the operational safety of your fleet.

Repair vs. replacement: The brake caliper repair kit
A complete brake caliper does not always have to be replaced. The function and ease of movement can often be restored with a high-quality brake caliper repair kit. Such kits usually contain new guide sleeves, seals and bellows. This is an economical solution for extending the service life of the brake system without having to sacrifice the safety of an original part. However, if the housing is cracked or the mechanics inside are damaged, replacing it with a new or reconditioned brake calliper is the safest choice for heavy goods vehicles.

Expert guide: All about truck brake calipers & maintenance

The brake calliper holds the brake pads and presses them against the rotating brake disk with the help of pistons in order to decelerate the vehicle through friction.

In the commercial vehicle sector, floating calipers dominate, as they can move slightly sideways during braking to press both pads evenly against the disc.

Signs include a hot rim after driving, a burnt smell, the vehicle pulling to one side when braking or a large amount of brake dust on one side.

Workshops can replace the guides and seals using special repair kits. However, if there are internal mechanical defects, the component should be replaced completely.

This should be done every time the brake pads are replaced. Only special brake grease that is resistant to high temperatures may be used so as not to attack the rubber sleeves.

They prevent dirt and road salt from getting into the sensitive mechanism and the guide pistons. A torn sleeve usually quickly leads to the saddle seizing up.

This component ensures that the distance between the pad and disc always remains constant despite wear in order to guarantee an immediate braking response.

It is recommended to at least compare the brake values on the test bench. If there is a large difference in braking force, it is safer to replace the brakes on each axle to ensure stability.

Repair your brake system efficiently!

With our accessories such as repair kits, brackets and cover plates, you can replace specific wear parts and get your brakes working optimally again. Order conveniently online and ensure reliable braking performance.